37709-2-0220
Page 1
Empire Comfort Systems Inc. • Belleville, IL
DVC (C,P) MODELS
BEFORE FIREPLACE IS INSTALLED IN THE WALL
1. With power completely turned off, remove plate and four
screws as shown.
See Figure 1.
Figure 1
2. Install the blower onto the pre-bent brackets on the blower
plate. Ensure the Velcro connects to secure the blower in
place.
See Figure 2.
Figure 2
3. Route wiring through opening created in step 1.
4. Secure plate and blower assembly into place with four screws.
5. Install thermo-disc by snapping into valve bracket under the
burner assembly.
See Figure 3.
Figure 3
6. Connect Power source into outlet on bottom right side of
fireplace.
FOR USE ON: DVC(C,P)(32,36,42)BP - (SEE PAGE 1) AND DVCX(36,42)FP - (SEE PAGE 5)
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
INSTALLATION INSTRUCTIONS
FBB10-1 BLOWER
