![background image](http://html1.mh-extra.com/html/empire-comfort-systems/dvp42fp30n-4/dvp42fp30n-4_installation-instructions-and-owners-manual_2404101065.webp)
31455-10-1115
Page 65
MAINTENANCE AND SERVICE
Please Note
It is normal for appliances fabricated of steel to give off
some expansion and/or contraction noise during the start
up or cool down cycle. Similar noises are found with your
furnace heat exchanger or car engine.
,WLVQRWXQXVXDOIRU\RXUJDV¿UHSODFHWRJLYHRIIVRPHRGRUWKH
¿UVWWLPHLWLVEXUQHG7KLVLVGXHWRWKHFXULQJRIWKHSDLQWDQGDQ\
undetected oil from the manufacturing process.
3OHDVHHQVXUHWKDW\RXUURRPLVZHOOYHQWLODWHGRSHQDOOZLQGRZV
,W LV UHFRPPHQGHG WKDW \RX EXUQ \RXU ¿UHSODFH IRU DW OHDVW
VL[KRXUVWKH¿UVWWLPH\RXXVHLW,IRSWLRQDOIDQNLWKDVEHHQ
installed, place fan in the “OFF” position during this time.
IMPORTANT:
Turn off gas before servicing appliance. It is
UHFRPPHQGHGWKDWDTXDOL¿HGVHUYLFHSHUVRQSHUIRUPWKHVHFKHFN
ups at the beginning of each heating season.
• Clean Burner and Control Compartment
Keep the control compartment, logs, and burner areas surrounding
WKHORJVFOHDQE\YDFXXPLQJRUEUXVKLQJDWOHDVWWZLFHD\HDU
Cleaning
Procedure
1. Turn off pilot light at gas valve.
2. Remove glass front. (See Glass Removal)
3. Vacuum burner compartment.
4. Reinstall glass front.
5. Ignite pilot. (See Lighting Instructions)
6.
Operate the pilot burner. If it appears abnormal call a service
person.
• Check Vent System
The appliance and venting system should be inspected before
LQLWLDO XVH DQG DW OHDVW DQQXDOO\ E\ D TXDOL¿HG VHUYLFH SHUVRQ
Inspect the external vent cap on a regular basis to make sure
WKDWQRGHEULVLVLQWHUIHULQJZLWKWKHDLUÀRZ
Reassembly and Resealing Gas Accumulation Relief System
Glass Frame Assembly and Combustion Chamber
Whenever the glass frame assembly is pivoted open by a delayed
ignition in the main burner, the glass frame assembly gaskets and
FRPEXVWLRQFKDPEHUPXVWEHH[DPLQHGE\DTXDOL¿HGVHUYLFHSHUVRQ
for damage. All damaged gaskets on the glass frame assembly and
FRPEXVWLRQFKDPEHUPXVWEHUHSODFHGE\DTXDOL¿HGVHUYLFHSHUVRQ
If damage occurs to the combustion chamber, it must be replaced
E\DTXDOL¿HGVHUYLFHSHUVRQ&RQWDFW(PSLUH&RPIRUW6\VWHPV
Inc. for replacement parts.
Glass Cleaning
,WZLOOEHQHFHVVDU\WRFOHDQWKHJODVVSHULRGLFDOO\'XULQJVWDUWXS
FRQGHQVDWLRQZKLFKLVQRUPDOIRUPVRQWKHLQVLGHRIWKHJODVVDQG
causes lint, dust and other airborne particles to cling to the glass
VXUIDFH$OVR LQLWLDO SDLQW FXULQJ PD\ GHSRVLW D VOLJKW ¿OP RQ WKH
JODVV,WLVWKHUHIRUHUHFRPPHQGHGWKDWWKHJODVVEHFOHDQHGWZRRU
WKUHHWLPHVZLWKDQRQDEUDVLYHKRXVHKROGFOHDQHUDQGZDUPZDWHU
ZHUHFRPPHQGJDV¿UHSODFHJODVVFOHDQHU$IWHUWKDWWKHJODVV
VKRXOGEHFOHDQHGWZRRUWKUHHWLPHVGXULQJHDFKKHDWLQJVHDVRQ
depending on the circumstances present.
General Glass Information
WARNING: Do not operate appliance with the glass front
removed, cracked or broken. Replacement of the glass should
EHGRQHE\DOLFHQVHGRUTXDOL¿HGVHUYLFHSHUVRQ
2QO\JODVVDSSURYHGIRUXVHE\WKHPDQXIDFWXUHULQ¿UHSODFHPD\
be used for replacement. The glass replacement should be done
E\DOLFHQVHGRUTXDOL¿HGVHUYLFHSHUVRQ
WARNING:
7KHXVHRIVXEVWLWXWHJODVVZLOOYRLGDOOSURGXFWZDUUDQWLHV
2. Care must be taken to avoid breakage of the glass.
3. Under no circumstances should this appliance be operated
ZLWKRXW WKH JODVV IURQW RU ZLWK D EURNHQ JODVV IURQW
5HSODFHPHQWRIWKHJODVVZLWKJDVNHWDVVXSSOLHGE\WKH
PDQXIDFWXUHUVKRXOGEHGRQHE\DTXDOL¿HGVHUYLFHSHUVRQ
4. Do not abuse the glass by striking or hitting the glass.
WARNING: Do not use abrasive cleaners on glass. Do
not attempt to clean glass when glass is hot.
Glass Door Removal
5HPRYHWKHWRSORXYHUE\JUDVSLQJWKHORXYHUWKHQOLIWXSZDUG
DQGSXOOIRUZDUG
5HPRYHWKHERWWRPORXYHUE\OLIWLQJXSDQGSXOOLQJIRUZDUG
/RFDWHWKHERWWRPWZRJODVVIUDPHVSULQJFODPSV3XOOIRUZDUG
DQGGRZQWRUHOHDVHWKHPIURPWKH*ODVV'RRUIUDPH
4. Remove the Glass Door by pulling the bottom of the door
RXWZDUGVHYHUDOLQFKHVWKHQOLIWXSZDUGVWRGLVHQJDJHLWIURP
WKH¿UHER[XSSHUÀDQJH
Glass Door Installation
1. When installing the Glass Door assembly, make sure that the
GRRUWRSÀDQJHLVKRRNHGRYHUWKH¿UHER[WRSÀDQJHDVLOOXVWUDWHG
LQWKH³&RUUHFW´YLHZLQ)LJXUH
Important: Do not allow the gasket across the top of the
GRRUWRUROOXSRQWRSRIWKH¿UHER[ÀDQJHDVVKRZQLQ
“Incorrect” view in Figure 80.
7RLQVWDOOFRUUHFWO\WKHGRRUVKRXOGEHKHOGDWDQDQJOHRXWZDUG
IURPWKH¿UHER[DVVKRZQLQWKHLOOXVWUDWLRQWKHQFDUHIXOO\HQJDJH
WKHXSSHUÀDQJHRIWKHGRRUIUDPHZLWKWKHWRSÀDQJHRIWKH
¿UHER[&HQWHUWKHGRRUOHIWWRULJKWWKHQDOORZWKHERWWRPRI
WKHGRRUWRVZLQJLQZDUGWRVHDODJDLQVWWKH¿UHER[IURQW
2QFHWKHJODVVGRRULVSODFHGÀDWWRWKH¿UHER[IURQWHGJHV
HQJDJHWKHWZRVSULQJODWFKHVWRWKHERWWRPÀDQJHRQWKHJODVV
door frame to secure the door assembly.
4. Replace the top and bottom louvers.
FIREBOX
TOP
CORRECT
FIREBOX
TOP
GASKET
INCORRECT
Figure 80
Summary of Contents for DVP42FP30N-4
