39358-3-1019
Page 61
ReMote CoNtRoL - WIRING DIAGRAM
LIGHT
COMBUSTION
BLOW
ER
AUX.
L
N
+ -
If any of the original wire as supplied with this unit must be
replaced, it must be replaced with equivalent gauge and tem-
perature rated wire.
This appliance is only for use with the type of gas indicated
on the rating plate and may be installed in an aftermarket,
permanently located, manufactured (mobile) home where not
prohibited by local codes. This appliance is not convertible for
use with other gases, unless a certified kit is used.
CAUtIoN
Do not operate the appliance with glass panel removed,
cracked or broken. Replacement of the panel should be
done by a licensed or qualified service person.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, personal injury
or loss of life. Installation and service must be performed
by a qualified installer, service agency or the gas supplier.
Summary of Contents for DVP36FP30N-5
Page 20: ...39358 3 1019 Page 20 Figure 29 Figure 30 Figure 31 EXAMPLES TOP VENT RUN...
Page 37: ...39358 3 1019 Page 37 Figure 57 DVVK 4FV DIRECT VENT TERMINATION KIT CONT D...
Page 46: ...39358 3 1019 Page 46 Figure 70 MILLIVOLT SYSTEM STANDING PILOT WIRING DIAGRAM...