EMPEROR RECORDER 2
u
Model 038
Clock Setup
1. During stop status, press SETUP to access the Se-
tup Menu.
2. Use UP/DOWN to highlight the CLOCK icon as the
above figure. Press ENTER key to enter the menu.
3. Use UP/DOWN to highlight the Date, Time respec-
tively.
4. With Date(mm/dd/yyyy) highlight , press ENTER,
and input the local date by numbers, press ENTER
again.
5. With Time(hh:mm:ss) highlighted, press ENTER,
and input the local time by numbers, press ENTER
again.
NOTE:
If you want to cancel input, press RETURN.
The time information will not be cancel after power off
the recorder.
Editing a DVD-/+RW or DVD-/+R disc
Insert a recorded DVD-/+RW or DVD-/+R disc on the
disc tray.
Press DISC OPER button to access the disc editing
menu.
The disc current information will be displayed on back-
ground, you could press LEFT button here to get the whole
information screen. You could get know the Disc Name,
Record start time, current recorded time, current NO-
NEMPTY titles, the remain free space, the DVD VIDEO
format (NTSC/PAL), the disc-locked state etc.
Enter the disc operation menu. With each icon highligh-
ted by pressing UP/DOWN, the corresponding
description of each operation will be displayed on the
screen, such as Play, Erase disc, Rename disc, Record a
new title, overwrite disc, Lock disc.
Press ENTER to run the operation.
Play Disc (DVD-/+RW or DVD-/+R)
You can play back the entire disc from the beginning to
the end.
Press ENTER button after selecting
Play by using UP or DOWN button.
It starts to play back the beginning of the Disc.
Erase Disc(DVD-/+RW only)
Press ENTER button after selecting
Erase Disc by using UP or DOWN button.
Press ENTER button to erase the contents of a disc
after selecting Yes by using LEFT and RIGHT buttons.
It takes a few minutes to erase the disc.
Rename disc(DVD-/+RW/DVD-/+R)
Press ENTER button after selecting
Rename disc by using UP or DOWN button. The keybo-
ard will show on the screen.
Select a letter which you want to input by using LEFT,
RIGHT, UP, DOWN button, and press ENTER button to
confirm it.
The control bars of the last line in the keyboard is for
edit command.
If the inputting of letters is finished, press ENTER button
after selecting OK.
Record a new title (DVD-/+RW and DVD-/+R)
Highlight the icon and press ENTER.
The unit will quit the disc operation mode and switch to
the monitor mode, thus, you could start the record opera-
tion.
Lock(DVD-/+RW only)
When the icon display LOCK, it shows you can lock your
current disc. If you have locked your disc, you cannot make
any changes any more except play it back, but you can
unlock it by UNLOCK.
NOTE:
According to the different disc type, the different interfa-
ce will be displayed.
Please check your unit and manual to get the right ope-
ration way.
Finalize Disc(DVD-/+R only)
Highlight the icon and press ENTER. It will take a few
minutes to finalize the disc.
NOTE:
If a DVD+R has been finalized, you can not record or
edit the DVD+R any more.
If you want to make your disc compatible with the other
DVD player, you should go on FINALIZE operation.
Editing a title of a Disc
Insert a DVD+RW on the disc tray.
Select a title ,press RIGHT button, the operate menu will
be displayed on screen.
With each icon highlighted by pressing UP/DOWN,
the corresponding description of each operation will be
displayed on the screen, such as PLAY title, Edit title,
Rename title, Erase title Overwrite title, Overwrite disc,
Append title.
Press ENTER to run the operation.
Editing a title of DVD-/+RW
1. Insert a recorded DVD+RW on the disc tray.
The index Picture Screen pops up.