5.3
Drape the power cord over and out of the filter as shown below. Make sure the cord is resting within one of the
knotches on the filter rim to ensure the cord will not interfere with the filter lid.
WARNING: Do not operate the Advanced UV Sterilizer when the water level inside the skimmer filter is below the recom-
mended point (as indicated on Diagram 5-1). Operating the unit in dry conditions will result in damage to the unit and
possible un safe conditions. Damage cause in this way will void the warranty.
5.4
Under no circumstances should the power supply be
submerged under water (inside or outside the filter).
5.5
Place lid securely on the filter.
5.6
After the recommended water level is obtained, you may
plug in your Advanced UV Sterilizer to start operation.
5.7
You are now ready to operate the Advanced UV Sterilizer.
18 Watt Advanced UV
25 & 50 Watt Advanced UV
5
6.0 Servicing the 18, 25, & 50 Watt Advanced UV Sterilizer
6.1
QUARTZ SLEEVE CLEANING:
(
WARNING:
Unplug the Advanced UV from the electrical source before removing the lid of the Savio skimmer or you risk
possible injury due to ultraviolet light exposure).
Once the Advanced UV is unplugged, remove the Savio Skimmer’s lid. Unscrew the UV’s mounting screws and gently remove
the unit from the skimmer box. Remove the soft solid waste deposits on the quartz sleeve with a mild dish washing detergent
then rinse thoroughly. For harder deposits on the quartz sleeve remove with vinegar or muriatic acid.
WARNING:
Extra care
must be used when handling chemicals including acids of any kind.
Quartz sleeve cleaning frequency is determined by the condition of the water being treated. Supplying solids-laden water to the
UV decreases UV transmissibility through the water and weakens overall UV performance. This also makes the quartz sleeve
dirty quicker; therefore, requiring more frequent cleanings. When finished, reinstall the Advanced UV by following these steps in
reverse.
Diagram 5-1
