background image

OPERATING INSTRUCTION

1).Electronic Switch

A. Light
B. Time
C. Speed down
D. Speed up
E. Max speed
F. On /off

A         B        C                           D        E         F

2). Touch Control

 A: Light
Press the button once to turn on the light, press again to turn off.
B. Timer
In standby mode, press 3 seconds, to enter into time setting mode, 
Press “+” set hour (0-23 circle set) and press “–” set minute(0-59), 
No operation within 5 seconds for automatically confirmation. When
working, press once to enter into delay turn off mode for 3 minutes. 
Press again to increase delay turn off time from 3-59 minutes. 
No operation for 5 seconds, the hood will be turn off in 3 minutes. 
Press again to turn off immediately.  
C

.- 

In

 

standby

 

mode, press to

 

change

 

to

 

speed

 

1

.

D

.+ 

In

 

standby

 

mode, press

 

to change to

 

speed

 

2 & 3.

 

E. Speeds
In

 

standby

 

mode, press once to start high

 

speed

.

F

Power on/off

In standby mode, press once to turn on all buttons. Press

 

again to

 

turn

 

off

 

the

 

power. When working, press once to start

 

delay

 

turn

 

off

 

3 minutes. In

 

delay turn off

 

mode, press

 

again to stop delay

 

turn off.

Summary of Contents for EMPV-30RH05













Reviews: