22
Oven light bulb
Door removal
In order to obtain easier access to the oven chamber for cleaning, it is possible to remove the door, To do
this, tilt the safety catch part of the hinge upwards. Close the door lightly, lift and pull it out towards you. In
order to fit the door back on to the cooker, do the inverse. When
fitting
, ensure
that the notch of the
Hinge is correctly placed on the protrusion of the hinge holder. After the door is fitted to the oven, the
safety catch should be carefully lowered down again. If the safety catch is not set it may cause damage
to the hinge when closing the door.
Door removal Removal of the intemal glass panel
Removal of the internal glass panel
Unscrew and unfasten the plastic latch that is in the corner at the top of the door .Next take out the glass
from the second blocking mechanism and remove. After cleaning, insert and block the glass panel, and
screw in the blocking mechanism.
OPERATION IN CASE OF EMERGENCY
In the event of an emergency, you should:
!switch off all working units of the cooker
!disconnect the mains plug
!call the service center
! Some minor faults can be fixed by referring to the instructions given in the table below. Before calling the
customer support center or the service center check the following points that are presented in the table.
