V1/2021-30314
26
General Information
Warning
The mounting material must be adapted to the exist-
ing substrate by the installer.
The installer alone is liable for ensuring that the
fixing material is suitable for the respective masonry
and that the installation is carried out professionally.
Depending on the surface, it may be necessary to
replace supplied mounting material with another
suitable mounting material.
Description of the clamp awning
The clamp awning is operated by hand winch. Fig. 1 shows an extended clamp awning.
The clamp awning frame essentially consists of a metal frame, the awning fabric and a device for extension and retraction.
Metal frame:
Consists of a support frame, which is made up of the drop arms
5
, the upper parts of the stands
3
and
the lower parts of the stands
2
and the height adjusters
4
.
The materials used are resistant to wear caused by use and weathering, assuming normal conditions of use
and
Mediterranean
climates.
The manufacturer/product identification can be found on the height adjuster
4
components.
Figure 1 for illustrative
purposes only
4
3
5
2
