Emotron FLD48-003-54, Installation & Getting Started Instruction, Page: 43 / 84

CG Drives & Automation, 01-6142-01r2 Getting Started 39
5.2.4 Control keys
In FlowDrive mode only the Stop/Reset button is used to
reset the AC drive after a trip.
As default the RUN L and RUN R keys are disabled and set
to “Flow control” in menus “Ref Control [214]” and “Run/
Stop Control [215]”.
5.2.5 The Toggle and Loc/Rem
Key
This key has two functions: Toggle and
switching between Loc/Rem function.
In FlowDrive mode the Loc/Rem function is
disabled.
Press one second to use the toggle function. When editing
values, the toggle key can be used to change the sign of the
value, see further in the Software instruction.
Toggle function
Using the toggle function makes it possible to easily step
through selected menus in a loop. The toggle loop can
contain a maximum of ten menus. As default the toggle loop
contains the menus needed for Quick Setup. You can use the
toggle loop to create a quick-menu for the parameters that
are most importance to your specific application.
Add a menu to the toggle loop
1. Go to the menu you want to add to the loop.
2. Press the Toggle key and keep it pressed while pressing
the + key.
Delete a menu from the toggle loop
1. Go to the menu you want to delete using the toggle key.
2. Press the Toggle key and keep it pressed while pressing
the - key.
Delete all menus from the toggle loop
1. Press the Toggle key and keep it pressed while pressing
the Esc key.
2. Confirm with Enter.
Default toggle loop
Fig. 58 shows the default toggle loop. This loop contains the
necessary menus that need to be set before starting.
Example:
To access submenus to menu [221],
press Toggle to enter menu [221] then use the Next key to
enter the sub menus [222] to [22H] and enter the
parameters. When you press the Toggle key again, menu
[3A11] is displayed.
Fig. 58 Toggle loop example.
Table 21 Control keys
RUN L:
gives a start with
left rotation.
Not used in FlowDrive
STOP/RESET:
Resets the AC drive after a
trip
RUN R:
gives a start with
right rotation.
Not used in FlowDrive
211
221
222
3A21
343
223
349
NEXT
NEXT
3A11
3A31
3A41
Toggle loop
Sub menus
Sub menus
341
3C13
3A42
3B31
22H