Emotiva Fusion Flex, User Manual

Page: 14 / 26

Page 10
Fusion Flex Amplifier
7. RS-232 Serial Remote Control Interface
Accepts RS-232 control codes from a wired serial remote control.
8. Trigger Input
The Trigger Input is used to allow other trigger-enabled equipment to switch the Fusion Flex
Amplifier between On and Standby.
9. IR Input.
Connect an external IR sensor to this input if the
Fusion Flex Amplifier
is mounted such that IR
remote control signals cannot reach the front panel directly.
10. Power Mode Switch.
Selects between regular, triggered, and auto-on power modes.
Refer to the Installation Tips and Configuration sections for details.
11. Standard IEC Power Inlet.
The Fusion Flex Amplifier requires a standard IEC C7/C8 (2.5A two wire) power cable.