Emos ZC0113, Manual

Page: 3 / 12

3
Type Power source Power Luminous flux
Color
temperature
Dimensions
ZC0113 220–240 V~, 50/60 Hz 3 W 100 lm 4 000 K 135 × 135 × 32 mm
GB | Recessed LED Orientation Light Fitting
The LED light fitting is designed to be installed onto a solid base in indoor or outdoor areas.
Enclosure: IP65 – for outdoor environments.
Check the light fitting before use and do not use it if you find any of its parts damaged. Before assembly, make sure power
supply is disconnected. In case of malfunction, do not try to repair or dismantle the light fitting. The LEDs are not replaceable.
Failure to observe any instructions provided in the manual may result in injury or property damage.
Installation
Attach the light fitting securely to a fixed base in the wall. Connect the power cable for connecting to a 230 V~ power network.
The conductor must not be connected to power supply at the time of installation of the light fitting. Connection of the power
cable to the light fitting may only be done by a professional with relevant qualifications. Proceed in accordance with the
enclosed drawing during installation.
L = phase conductor (usually black, brown or grey)
N = neutral conductor (usually blue)
WARNING
• The light fitting is only suited for fixed installation.
• The light fitting may only be connected to an electrical network with installation and protection that is in line with valid
regulations and standards.
• Before interfering with the light fitting or performing maintenance and repair, the light fitting must be disconnected from
the power grid. This must only be done by a knowledgeable person in accordance with valid regulations on qualification
for such activities.
• Immediately take the light fitting out of operation if any portion of the light fitting becomes damaged.
• LEDs inside the light fitting are not replaceable.
• Do not interfere with the internal wiring of the light fitting.
• Never cover the light fitting with materials for thermal insulation.
• If the light fitting housing becomes damaged, do not use the light fitting and immediately replace the housing with a new one.