10
`
To turn off the walk assist, let go of the button.
The function is designed for walking alongside the bicycle only. Please do not
use this
function when riding.
When the display is powered ON the default is PAS level 0.
Note: Increasing your PAS level provides more power and speed.
Backlight Display:
Press and hold the light button for a few seconds to dim the display backlight of the device.
This will change the backlight to a darker setting for night riding.
Press and hold the light button again to turn off this feature and return to the default
backlight setting.
If a front light is installed, this will also power the light
1.7 DISPLAY SETTINGS
Preparation:
Make sure the display is turned ON.
To Enter Setting:
Press the button twice quickly and press the button again when “Display Settings” is
selected to enter the Display Settings. This will enable you to adjust the default settings of the
device to your preference.
Controls:
Press the button to select and use the “+” and “-” buttons to toggle between the options.
Unit:
This displays the unit of the speed in Metric (km/h) or Imperial (mph). Press the
button once to
save your preferred setting and exit this option. Use the button to scroll down to the next
display setting option.
Brightness:
Use this setting to adjust the default brightness of your device. You may adjust this setting to pre-
set values between 10%, which is the lowest available brightness, and 100% which is the highest
available brightness.
Auto-Off:
This sets the time in minutes that the display system is inactive before turning off.
Max PAS:
This sets the number of pedal assist levels for your motor. You can adjust this level to