15
`
2. Rear Shock
A5RR1 and A5RE
To set the pressure in the main cylinder (valve marked "MP), use a compatible shock
pump. Remove the valve cap and attach the shock pump according to the pump
manufacturer’s specifications.
Recommended air pressure for the main cylinder is 100-150psi.
DO NOT EXCEED 180psi.
A5RR1 ONLY
The A5RRI uses an additional adjustment feature indicated by the air valve positioned at
the smaller end of the shock. To set the negative pressure (valve marked "NP"),
THE NEGATIVE PRESSURE MUST NOT EXCEED THE MAIN PRESSURE.
Lubrication: It is recommended that the main shaft be lubricated every 25-30 hours of use
or after a long period of non-use.
Cleaning: Use only warm water and a lint-free soft cloth to wipe down. Do NOT use
solvents, degreasers, waxes and other chemicals, as they may damage the shock and
void the warranty.
WARNING
Your ExaForm Rear Shock requires regular maintenance to function. ExaForm Rear
Shocks must be regularly maintained by an authorized ExaFrom Service Center. Service
center locations can be found at www.kindshock.com.cn.
Do not disassemble your rear shock. Disassembly could cause damage and severe
personally injury as some of the contents are under pressure. Failure to follow these
warnings and instructions will immediately void your warranty.
