23
GB
GB
8. AIR CONDITIONER USE
8.1 Air conditioner start-up
1
Make sure about the right electrical supply of the air conditioner
2
By pushing the light button
ON/OFF
the light goes on
On the front
panel, the display will light up and the air conditioner will go into operation
in the set mode.
Attention!
For correct reception of signals by the indoor unit, the remote control
should be pointed towards it.
Avoid having obstructions between the remote control and the receiver
on the indoor unit.
If the remote control is installed on the wall, it should be close to the
indoor unit.
The remote control should not be:
- Allowed to get wet
- Dropped
- Exposed to the direct sun light
- Exposed to heating sources
Fluorescent lights and cordless phones can upset the operation of the
remote control. If this happens, move closer to the air conditioner.
Sending the signal to the air conditioner automatically, you will hear a
beep and the display will temporarily show the symbol
Caution
To ensure the proper functioning of the compressor it is expected that
- Once arrested, he will not be able to resume before 3 minutes.
- Once started, it will work for at least 6 minutes (unless the unit is turned
off)
BEEP
Summary of Contents for XEVO-0917 M3E
Page 39: ......
