45
Manual Duo Combi v 3.1
English
Care and maintenance
Washing instructions
• Hood:
Take off and extend the hood. Shower the hood from the inside (interior fabric) with luke warm water.
Use mild liquid soap as detergent. Cleanse it thoroughly. Drip dry the hood fully extended.
Duo Combi: Wash the detachable part of the hood according to the instructions above.
• Seat fabric and 5-point harness:
Remove the seat fabric from the chassis. Handwash seat fabric in lukewarm water. Use mild liquid
soap as detergent. Cleanse thoroughly. Drip dry the seat fabric. When the seat fabric is removed the
5-point harness is accessible. Only wipe the nylon straps and plastic parts clean with a damp cloth. Do
not hand wash. Make sure the harness is dry before reassembly.
• Front bar cover:
Remove the front bar cover. Hand wash in luke warm water. Use mild liquid soap as detergent on the
surface of the exterior fabric. Handle non-woven interior material with care. Drip-dry.
•
Removable inner fabric and mattress:
We recommend hand wash. Handle the non-woven material with care. Drip-dry.
• Carry cot:
Remove hood, bed-lining, Hi Pro, mattress and apron. Wipe the exterior fabric and the interior nonwoven
material, clean with a damp cloth. Do not hand wash. Dry the pram body in its fully extended position.
Make sure the wooden base is protected from any water.
• Hi Pro, Head protection (not Smart):
Wipe the surface clean with a damp cloth. Dry both sides off with a dry cloth.
General Information
• Ironing:
If any fabric part needs to be ironed, always use a 100 % cotton cloth in-between the iron and
the fabric to protect the fabric surface. Iron the exterior fabrics (100 % polyester) and the interior fab-
rics (65 % cotton/35 % polyester) on gentle heat (110°C on the iron).
• Make sure all parts are completely dry before reassembly. Check the trimmings and the seam on the
seat-fabric underneath the backrest-pocket.
• You may apply a material protector (like Scotchgard™) on the exterior fabric after washing. Always
apply before reassembly.
WARNING
• Do not place child/children in stroller for at least 24 hours after applying a material protector.
Reassembly
WARNING
• Make sure all parts are assembled correctly according to the instructions in this manual.
