This section applies to following products: Duo combi
Classic 3-in-1, Smart 3-in-1 and sport stroller
35
Manual Duo Combi v 3.1
2
1
1
2
3
3
4
English
• Adjust the suspension by pulling the grey tab (1) outwards and
twist the knob until the grey button locks into the desired posi-
tion: 1, 2 or 3. Repeat on the other side of the chassis – make
sure the knobs are in the same positions on both sides of the
chassis.
IMPORTANT
• Adjust the suspension when the chassis is folded to avoid
unneccesary wearing of the mechanism.
WARNING
• The suspension must be in the same position on both sides of
the chassis to avoid uneven strain and possible damage to the
chassis.
• Make sure the grey button has locked into position in order for
the suspension to work properly.
For models with air tyres
• If you need to inflate the tyres, use an air pump with an adapter
for cars.
• For correct air pressure, see marking on tyre.
• The tyres are assembled by hand. If the pram rolls unevenly, this
can easily be adjusted (deflate the tyres a little and pull the tyre
into correct position).
• Through depletion of the Ozone layer and an increase in the UV
radiation, the tyres could get small dry cracks appearing. This
does not affect the driving of Emmaljunga products, and Emmal-
junga will not be responsible for complaints resulting from this
matter.
WARNING
• To avoid a puncture, don't drive over sharp edges or broken glass.
• To achieve optimal driving conditions and to avoid a flat tyre, the
air pressure should be correct. Please check the air pressure on a
frequent basis.
How to use the adjustable suspension E.A.S.T.
(not Smart)
The adjustable suspension system enables you to select the strength
of the suspension as the child’s weight increases. Also useful for dif-
ferent kinds of surface.
• The suspension may be adjusted into three different positions.
1. Soft
2. Medium
3. Hard
WARNING
• Remove your child from the pram before adjusting the
suspension.
How to adjust the handle (not Sport chassis)
• Adjust the handle by pressing the grey buttons on the inside (2)
simultaneously.
Without releasing the buttons adjust the handle upwards or
downwards to the desired position (3).
Assembly of Classic / Smart Chassis
