This section applies to following products:
Duo combi Classic 3-in-1, Edge 3-in-1, Smart 3-in-1
10
12
12
13
13
11
31
Manual Duo Combi v 3.1
6
7
8
Assembly of pram body
• Attach the hood to the pram body by pushing the plastic leg of
the hood into the plastic holders on the pram body. Make sure
they snap into place.
• Press the hood fabric onto the plastic holder (10), on each side.
Press stud the collar (11) onto the pram body.
WARNING
The pram is delivered with a hood and it must always be assem-
bled when the pram is in use.
• Press the apron onto the hood (12) and onto the plastic holder
(13) on each side.
IMPORTANT
• The hood cannot be folded down when the apron is snapped onto
the hood without releasing the press studs (12)
English
