EMKO PID QUADRO EPLC9600, Manual, Page: 25 / 45

6.5. Accessing to the Calibration Parameter Pages
25
ü ü
ü ü
ii
When programming mode access button is
pressed for 5 seconds, calibration parameter
section password screen will be observed
CALIBRATION PARAMETERS SECTION
PASSWORD ENTERING SCREEN
CALIBRATION PARAMETERS SECTION
PASSWORD SCREEN
CALIBRATION PARAMETERS SECTION
PASSWORD ENTERING SCREEN
CALIBRATION PARAMETER SCREEN
(“CHANNEL-1 SENSOR TYPE SELECTION”)
Minimum Maximum
0 9999
911 1
TEKNÝSYEN ÞÝFRESÝ
0
CALIBRATION PASSWORD
0
Minimum Maximum
0 9999
0
CALIBRATION PASSWORD
MAIN OPERATION SCREEN
CALIBRATION PARAMETERS SECTION
PASSWORD SCREEN
Press right or left
button for selecting the
password parameter.
Press enter button for accessing to
password entering screen.
Enter the calibration parameter
section password as a 9111 with
cursor (lef, right, up and down)
buttons.
Press enter button for accessing
to the calibration section
parameters.
Press number (1,2,3 or 4)
buttons for accessing the relevant channel’s
parameter screen. Press escape button for
return to main operation screen.
If no operation is performed for 20 seconds in calibration parameters section, device turns to
main operation screen automatically.