EMKO PID QUADRO EPLC9600, Manual, Page: 20 / 45

6.3. Accessing to the Operator Parameter Pages
20
ii
ü ü
ü ü
Minimum Maximum
0 9999
123 4
MAIN OPERATION SCREEN
OPERATOR PARAMETERS SECTION
PASSWORD SCREEN
When programming mode access button is pressed
and released before 5 seconds is expire, If operator
password is different from 0, operator parameter
section password screen will be observed, If operator
password is 0 then operator parameter screen will be
observed. Press right or left
button for selecting the
password parameter.
Minimum Maximum
0 9999
0
0
Press enter button for accessing to
password entering screen.
Enter the operator parameter
section password with cursor
(lef, right, up and down) buttons.
OPERATOR PARAMETERS SECTION
PASSWORD SCREEN
OPERATOR PARAMETERS SECTION
PASSWORD ENTERING SCREEN
OPERATOR PARAMETER SCREEN
(CHANNEL-1 PARAMETERS)
Press enter button for accessing
to the operator section
parameters.
OPERATOR PARAMETERS SECTION
PASSWORD ENTERING SCREEN
If no operation is performed for 20 seconds in operator parameters section, device turns to
main operation screen automatically.
Press right or left button for
selecting the parameter.
1.0.1