3.Electrical Wiring
3.1 Terminal Layout and Connection Instructions
13
You must ensure that the device is correctly configured for your application.
Incorrect configuration could result in damage to the process being
controlled, and/or personal injury. It is your responsibility, as the installer, to
ensure that the configuration is correct.
Parameters of the device has factory default values. These parameters must
be set according to the system’s needs.
Only qualified personnel and technicians should work on this equipment.
This equipment contains internal circuits with voltage dangerous to human
life. There is severe danger for human life in the case of unauthorized
intervention.
Be sure to use the rated power supply voltage to protect the unit against
damage and to prevent failure.
Keep the power off until all of the wiring is completed so that electric shock
and trouble with the unit can be prevented.
c
c
c
c
1
1
3
2
1
4
3
1
5
4
1
6
5
1
7
6
1
8
7
1
9
8
2
0
9
2
1
1
0
2
2
1
1
2
3
1
2
2
4
aa
0.5 Nm
6 mm / 0.236 inch
Wire Size:
18 AWG / 1 mm²
Solid /Stranded
24 screws
terminal M3
Empty terminals
Torque 0.5 Nm
Screw driver
0.8x3mm