ROOM1 OFFSET:
Room1 Temperature Offset set value
(Range: -10.0 °C - 10.0 °C / Factory Setting: 0.0 °C).
ROOM2 OFFSET:
Room2 Temperature Offset set value
(Range: -10.0 °C - 10.0 °C / Factory Setting: 0.0 °C).
OUTSIDE OFFSET:
Outside Temperature Offset set value
(Range: -10.0 °C - 10.0 °C / Factory Setting: 0.0 °C).
HUMIDITY OFFSET:
Humidity Offset set value
(Range: -20% - 20% / Factory Setting: 0%).
SENS MINMAX:
Sensor selection for
MAX & MIN VALUES 1 PAGE
(Range: ROOM1 - ROOM2- ROOM1&2 / Factory Setting: ROOM1&2).
MAX & MIN VALUES 1 PAGE shows the saved minimum and maximum temperature values of
last 24 hours that was token from
ROOM1 or ROOM2 or (ROOM1 + ROOM2)/2
The selection depends on
TEMPERATURE SETTINGS PAGE
SENS MINMAX parameter.
SENS OPENING:
Sensor selection for
PROCESS VALUES PAGE
HOUSE parameter
(Range: ROOM1 - ROOM2- ROOM1&2 / Factory Setting: ROOM1&2).
PROCESS VALUES PAGE
HOUSE parameter shows
temperature value from
ROOM1 or ROOM2 or (ROOM1 + ROOM2)/2
The selection depends on
TEMPERATURE SETTINGS PAGE
SENS OPENING parameter.
TEMPERATURE SETTINGS
ROOM1 OFFSET: 0.0°C
ROOM2 OFFSET: 0.0°C
OUT. OFFSET : 0.0°C
HUM. OFFSET : 0%
SENS MINMAX : ROOM1&2
SENS OPENING: ROOM1&2
6.4.8 TEMPERATURE SETTINGS
62
6.4.7 SHUTTER CALIBRATION(EPC1A,EPC3A,EPC4A)
SHUTTER CALIBRATION
SHUTTER CLOSE: NO
SHUTTER OPEN: NO
1000
If
SHUTTER PARAMETERS PAGE SHUT.FEEDB.
parameter is
ENABLE
this page is shown. When calibrating shutter
firstly push MAN/AUTO button to manually control the shutter. Press
DOWN
button to close the shutter. When the shutter
fully closed select
SHUTTER CLOSE
parameter and change this parameter to
YES
. Wait for the parameter value to
turn
NO
. After this press
UP
button to open the shutter. When the shutter fully opened select
SHUTTER OPEN
parameter
and change this parameter to
YES
. Wait for the parameter value to turn
NO
and 1000 value seen on the screen.
SHUTTER PARAMETERS
STROKE TIME: 100SEC
STEP : 0.1%
SHUT.FEEDB.: DISABLE
STROKE TIME:
Stroke time set value (Range: 5 SEC- 600 SEC / Factory Setting: 100 SEC)
STEP:
Stroke time step set value (Range: 0.1% - 5.0% / Factory Setting: 0.1% )
SHUT.FEEDB.:
Shutter feedback function(disable,enable)