EMKO EAOM-72F, Manual, Page: 19 / 48

The PC interface kit comprises of a 9 pin D connector/FCC68(4 pin) connection lead with 2
meters of cable and the optional PC Software (Supplied on CD-ROM)
RS-232 Serial interface
9600 Baud Rate
8 data bits, No Parity,1 Stop Bit
Maximum allowable cable length is 10 meters
non-isolated
Processor :
Operating Systems :
Ram :
Monitor :
Fixed Disk Free Space :
Disk Drive :
Communication :
486 66MHZ
Windows 95/98/XP, Windows NT, Windows 2000
16 Mbyte
14’’ SVGA (640x480 resolution)
5 Mbyte
CD-ROM
An RS-232 communication port is needed to communicate with the
unit EAOM-72F
Insert the software CD into the CD-ROM drive on the PC. CD will autostart, then select EAOM-
72F Install.exe from the menu.
Press the windows START button icon, then select EAOM-72F SW EAOM-72F from the
program menu.
Þ
EAOM-72F
EAOM-72F
EAOM-72F PC SW
unit communicates with the PC using RS-232 communications. The PC software
allows the unit’s parameters and status information to be displayed on the PC screen.
Operator and Technician parameters can be viewed. Parameters are password protected.
There are four windows in
: Observation Window, Operator Parameters
Window,Technician Parameters Window and Adjustment Window.
4.3 PC Interface
4.3.1 Technical Specifications
4.3.2 Installation Instruction
4.3.2.1 Minimum System Requirements
4.3.3 Installing Software EAOM-72F
4.3.4 Using Of Communication Software EAOM-72F
4.3.5 Description
19