5
Front Panel and Rear Panel Indication
EMBC-8025 Intelligent Battery Charger with Power Supply
3.1.0 Front Panel Indicator
1
Mains LED
– The power LED is red if the battery charger is connected to the main and switch on
2
LCD Display
– Shows the battery voltage, charge current, charge voltage to the battery and error
message.
3.2.0 Rear Panel connection
3
Mains power Inlet
– A socket for connecting the battery charger to the mains power. Main voltage
of 240V ± 10%
4
ON/OFF Switch
– Connects and disconnects the main power supply.
5
Power Supply Unit (24VDC)
– To equipments DC supply for total load maximum of 4A.
6
Battery in
– Power Connector to the Batteries (Can be charged up to 200AH)
7
Backup Power Supply (24VDC)
– Power out connector to the 24VDC (>20A) limit output back-up
power on each contact for the EMIX rack systems products.
** NOTE:
It is very important to determine the size of cable for back up supplies.
(Ex: Size of the cable from
Battery Charger to Battery and Battery Charger connect to others equipments).
** NOTE:
Always Double Check on the positive (+) & Negative (-) priority before connecting to the unit
