TB-6596
Page 2 of 7
© 2019 DESCO INDUSTRIES INC
Employee Owned
EMIT
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 664-9980 • Website:
DescoEMIT.com
Packaging
1 SmartLog Pro®
1 Turnstile
1 Wall Mounting Bracket
1 Dual Independent Foot Plate
2 Slanted Standoffs
1 Socket Head Cap Screw, 10-32 thread
1 Internal Tooth Lock Washer
1 Allen Wrench, 5/32"
1 Turnstile Anchor Kit
8 Turnstile Keys
1 Certificate of Calibration
Installation
Installing the Turnstile
100 VAC / 110 VAC / 220 VAC and Ethernet access
are needed at the location of every SmartLog Pro® with
Turnstile prior to installation.
Click here
to download the Alvarado EDC Installation
and Maintenance Manual and see instructions on
anchoring and wiring the turnstile. Do not install the
SmartLog Pro® and its mounting hardware to the
turnstile until it is properly anchored and wired.
Installing SmartLog Pro® to the Turnstile
See
TB-6594
to learn more about the features and
components of the SmartLog Pro®.
1. Open the turnstile’s lid using the included keys.
2. Install the SmartLog Pro® onto the turnstile’s lid
using the 2 slanted standoffs, 1 socket head cap
screw and 1 internal tooth lock washer. See Figure
2.
NOTE: This mounting is also sold separately as
EMIT item 50783. It may be used to mount the
SmartLog Pro® onto other turnstile models. See
page 7 for the fabrications that need to be made
to the turnstile's lid in order to mount the SmartLog
Pro®.
3. Connect the Ethernet cable, terminal block, foot
plate cable, and power adapter to the back of the
SmartLog Pro®.
4. Locate the power switch inside the turnstile cabinet,
and set it to ON.
5. Locate the power switch on the back of the
SmartLog Pro®, and set it to ON.
6. Locate the foot plate cable at the base of the
turnstile and connect it to the Dual Independent
Foot Plate, so operators can place their feet on it
while performing tests at the turnstile’s entrance.
7. Complete the installation by establishing
communication to the SmartLog Pro® via the
Ethernet cable. See the “Network Setup” procedure
in
TB-6594
for more information.
Socket Head Cap Screw
Lock Washer
Short Slanted Standoff
Turnstile Lid
Long Slanted Standoff
Figure 2. Installing the SmartLog Pro® to the turnstile’s
lid
Figure 3. Installing the Dual Independent Foot Plate
