background image

6

©2020 EMist is a registered trademark of SanoTech 360 LLC., 

all rights reserved. EMist is a wholly owned subsidiary of SanoTech 360 LLC.

3. Assembly & Operating Instructions

Snap the bottom of the power pack housing. 
Slide toe strap onto the toe of the shoe with the white 
area touching the ball of your shoe. 
The black elastic strap area will stretch around the 
heel of your shoe. 

a) 

b)

c)

The power pack fits into the lower portion of the cart 
between 2 rubber bumpers to hold the pack in place 
during use. 
The cart has an adjustable clamp that is attached to the 
handle to secure the power pack in place during use. 
The handle extends and lowers for an adjustable height 
when needed. 
The handle also contains a holster for the applicator for 
ease of storage. 

a)

 

b)

c)

d)

CAUTION: 

THE GROUNDING STRAP MUST BE WORN 

WHILE USING AS A BACKPACK BY USER. IF THE 
TOE STRAP IS NOT UTILIZED THE SYSTEM WILL 
SHUT DOWN AND NOT OPERATE CORRECTLY. 

White thicker 
area for ball of 
shoe.

Snap kit for 
bottom of power 
pack housing.

Black elastic strap 
stretches around 
heel of shoe. 

Applicator holder for 
storage.

Adjustable clamp to 
secure power pack in 
place during use.

Rubber bumpers.

3. Grounding Strap:  

This protection accessory is light weight and very flexible.

4. Pull Cart Configuration:  

This optional feature is easy to use and mobile using 4 ESD 
(Electrostatic Dissipative) wheels for grounding.

While using as a backpack, the grounding strap must be worn by the user. If the grounding strap is not  

utilized the system can shut down and/or not operate correctly. 

 

Optimal distance from a target is 3-5 feet.

Applicator will shut off once power indicator on battery reaches 1-2 bars. 

Ensure applicator is secured while putting the backpack on/adjusting straps/taking backpack off to avoid  

damaging the applicator. 

While using the pull cart configuration, the ESD (Electrostatic Dissipative) grounding is completed by the 

snap button of the Power Pack touching the silver circle located on the base plate of the pull cart. If the 

power pack is not seated correctly in the pull cart, the system can shut down and/or not operate correctly. 

Tips

Summary of Contents for EM360

















Reviews: