16
|
ENGLISH
Channel: ____________________________________________________
5.3 Configuring the signal booster (2)
1.
Turn on your computer.
2.
Open your internet browser (e.g. Internet Explorer or Firefox).
3.
Type ‘http://192.168.8.1’ in the address bar.
4.
Press the ‘Enter key’ or click ‘Go to’.
5.
Click ‘Setup Tool’.
6.
You will now be asked for a ‘Username’ and a ‘Password’. Fill out ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
7.
Click ‘Advanced Setup’ in the left menu.
8.
Click ‘Network’ in the left menu.
9.
Click ‘LAN/DHCP Server’.
10.
Select ‘Stop’ at ‘DHCP Server’.
11.
Click ‘Apply’ at the right side in the menu ‘DHCP Server’.
12.
Type ‘192.168.8.200’ in the ‘LAN IP address’ field.
13.
Type ‘255.255.255.0’ in the ‘Subnet mask’ field.
14.
Click the button ‘Apply & Restart’.
Note! If you wish to log in to your router at a later point in time, you must assign a fixed
IP address to your computer.
1.
Click ‘Start’.
2.
Click ‘Control Panel’.
3.
Double click ‘Network Connections’.
4.
Right click the appropriate ’LAN Connection’.
5.
Click ‘Properties’.
6.
Select ‘Internet-protocol (TCP/IP)’.
7.
Click ‘Properties’.
8.
Select ‘Use the following IP Address’.
9.
Enter ‘192.168.8.25’ in the ‘IP Address’ field.
10.
Enter ‘255.255.255.0’ in the ‘Subnet mask’ field.
11.
Click ‘OK’.
12.
Enter ‘http://192.168.8.200’ in the address bar to log in to the router.
5.4 Configuring your wireless router (1)
When configuring the router and its security, we assume you will be using the device
as a wireless router. Make sure your wireless router is connected to your computer
using a UTP network cable.
1.
Open your web browser (e.g. Internet Explorer, Opera or Firefox).
2.
Type ‘http://192.168.8.1’ in the address bar.
3.
Press the ‘Enter’ key or click ‘Go to’.
4.
Click ‘Wireless Wizard’.
