Eminent EM4172, (Dutch) User Manual

Page: 21 / 112

4 |
ENGLISH
2.2 Power ON/OFF Procedure
Connect the power supply to your device first and only then plug it into the wall socket.
To turn on the device, press the power switch to start up the system. It will take about
1-2 minutes for the device to go online but the blue system LED (OS) will indicate
when the system is ready.
To safely turn off the device, press and hold the power switch for 3 seconds until the
blue system LED (OS) starts flashing. The system will then shut down all services and
about 20 seconds later, it will power down. If for some reason the system is
unresponsive, press and hold the power switch for 6 seconds to forcefully shut down
the system and cut off the power.
3.0 Preparing the EM4172
3.1 Mounting the hard disk(s)
The NAS is able to use one or two hard disks simultaneously. Use the following steps
to mount the hard disk(s).
1. Place the NAS up-side-down.
2. Locate the screw on the bottom side of the front panel and remove the screw. Also
refer to the following image:
3. Lift the front panel upwards and away from the casing. Also refer to the following
image: