Hold down 4s:
Turn on/turn off the control
functions when P21 is activated
Pressed together:
Turn on Function blocking
if P20 is activated
Pressed simultaneously:
Clears temperature
logs (Cr9)
Hold down 3s:
Adjust the Setpoint
Quick touch:
Current process display
Continuously pressed when turning on the
control:
Disables locked mode (if enabled)
Quick touch:
Maximum and minimum
temperatures display (record)
Pressed simultaneously:
Access to complete
parameters menu
Press for 5s:
Turn on defrost mode
+
+
TABLE 3
PAR
Cr9
rE9
Prc
Loc
CtL
dFr
SEt
Function Selection
Clear Min|Max
Min|Max recorded
Show current Process
Functions Blocking
Control Functions Shutdown
Manually Defrost
Setpoint Adjustment
FUNCTION
DESCRIPTION
TABLE 2
07
USER
MANUAL
TEMPERATURE CONTROLLER
STORM
ST
101
2HP
3. EASY MENU FEATURES
By pressing and then the following
sequence will be shown
▶
[PAR] [Cr9] [rE9] [Prc] [Loc]
[CtL] [ dFr] [SEt]
▶
To access the function, press
Description of functions:
▶ PPress and then until
[dFr]
is shown. Press and
[On]
and will be shown.
▶ The defrost could be activated or disactivated by pressing
until
[On]
be shown and is off.
With the functions blocked, it will only be
possible to view the parameters. In an attempt to
change the parameters,
[Loc]
will be displayed.
indicates that this function is activated.
This function requires that parameter
P20
have
a value greater than 15. If
P20
have the value
[no]
,
the blocking function will not be activated.
4. QUICK ACCESS KEY MAP
When the controller is displaying the
temperature, the key combinations below are
shortcuts to the functions:
3.1. MANUAL DEFROST CYCLE
(FORCED DEFROST)
3.2. FUNCTIONS LOCKDWON
▶
Press and then until
[Loc]
be shown. Press and
[OFF]
will be shown.
▶ Press during the time that was setted in P20.
[On]
will be
shown.
This function disables the control functions.
ST101 2HP starts to operate as a temperature
display. This function depends on the
parameters configured in
P21
.
▶ Press and then until
[Ctl]
be shown. Press and
[OFF]
and will be shown.
Note:
This function could be activated or disactivated by
pressing .
[On]
and will be shown.
3.3. CONTROL FUNCTIONS SHUTDOWN
