E-mail: [email protected]
Made in Rome, New York, USA
2
TABLE OF CONTENTS
To the Installer and Safety Instructions ........................ 2
Warnings, Controls and Components, ........................ 3
System Options, Installer Supplied Items .................... 3
Low Ambient Option, Site Preparation ....................... 3
Electrical Wiring .......................................................... 3
Refrigerant Piping, P-Trap Installation ........................ 4
Refrigerant Processing, General Recom. .................... 4
Complete Piping Connections, Starting the Unit .......... 4
Operation and Maintenance, Specific Changes .......... 5
Field Charging .............................................................. 6
SCC/SHC Single-Zone Installation ..........................7-9
MC/MH4 Multi-Zone Installation ............................ 10-11
MC/MH2 Multi-Zone Installation ............................12-13
Test Unit Performance Data Sheet ............................ 14
Warranty .................................................................... 15
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
P/N# 240004514, Rev. 1.5 [05/05]
Shipping Damage MUST be Reported to the Carrier IMMEDIATELY!!!
Examine the exterior. Remove cover and examine compressor and piping for signs of damage.
TO THE INSTALLER
(1) Retain this manual and warranty for future reference.
(2) Before leaving the premises, review this manual to be sure
the unit has been installed correctly and run the unit for one
complete cycle to make sure it functions properly.
To obtain technical service or warranty assistance
during or after the installation of an EMI unit, check
our website @ www.enviromaster.com or call your
installing contractor or distributor. Our technical service
department may be contacted at 1-800-228-9364.
When calling for assistance, please have the following
information ready:
• Model Number_________________________
• Serial Number_________________________
• Date of installation______________________
SAFETY INSTRUCTIONS
• Read all instructions before using the EMI AmericaSeries
high efficiency condensing unit. Install or locate this unit
only in accordance with these instructions. Use this unit
only for its intended use as described in this manual.
• Check the rating plate on the EMI AmericaSeries con-
densing unit before installation to make certain the
voltage shown is the same as the electric supply to
the unit.
• The EMI AmericaSeries condensing unit must be con-
nected only to a properly grounded electrical supply. Do
not fail to properly ground this unit.
• Turn off the electrical supply before servicing the EMI
AmericaSeries condensing unit.
• Do not use the EMI AmericaSeries condensing unit if
it has damaged wiring, is not working properly, or has
been damaged or dropped.
[Save These Instructions]
!
!
Recognize this symbol as an indication
of important safety information
Tampering with the EMI AmericaSeries condensing
unit is dangerous and may result in serious injury
or death. Tampering voids all warranties. Do not
attempt to modify or change this unit in any way.
!
!
DANGER
EMI AMERICASERIES CONDENSING UNIT
CONDENSING UNITS
This manual is intended as an aid to a qualified service personnel
for proper installation, operation, and maintenance of these
EMI AmericaSeries high efficiency condensing units. Read the
instructions thoroughly and carefully before attempting installation
or operation. Failure to follow these instructions may result in
improper installation, operation, service, or maintenance, possibly
resulting in fire, electrical shock, property damage, personal
injury, or death.
