SANTOS: Instruction and Maintenance Manual
98111 EN 4.3 - 02 2021
8 / 15
www.santos.fr
TROUBLESHOOTING
Identifying the cause of appliance stoppage precisely.
The appliance does not start:
•
Check: the mains supply, the condition of the power cord (7).
The appliance stops due to motor overheating:
(the motor unit is hot)
The motor is protected by a built-in thermal cutout. In the event of overheating, the motor
stops.
•
Set the On / Off switch (6) to
0
position, disconnect the plug (7).
•
Wait until the motor cools down (20 to 45 minutes), reconnect the plug (7) then press
the On / Off switch (6) (position 1).
If the problem persists, switch off the power supply to the appliance (unplug the cord from
the mains socket (7)) and call in the maintenance service or contact a SANTOS-approved
dealer.
The appliance stops further to an overload:
If the motor stalls (due to excessive pressing), it can heat very quickly and stops by
overload protection.
408007-009-010-011-152-252 G22E 8/14
