EMG ELHY EB 630 Assembly Manual Download Page 45

Page: 45 / 71

Assembly and installation

Assembly

6.1

ELHY-Montageanleitung_2021_EN.docx

/ 71

6.1.2

Installing the ELHY

thruster

To attach the ELHY

thruster, there are fastening eyelets on the

motor housing and holes in the lifting rod, which can be used with
suitable bolts to establish the connection to the equipment to be
operated (e.g. brakes).

The diameter and length of the required bolts are specified in the
dimension tables (

⇒

Technical data chapter, Dimensions section).

When selecting or measuring the bolts (by the customer) the
required pivoting ability of the ELHY

thruster must be

observed.

The ELHY

thruster is installed in the following steps:



Use lifting gear to move the ELHY

thruster to the required

installation location.



Grease the bolt slightly in order to prevent it rusting tight.



Insert the bolt into the foot hole.



Insert the bolt into the thrust shackle hole.

NOTICE

Both bolt axes must be parallel as otherwise, the lifting rod jams
and the thruster’s free power development is not guaranteed.



Use cotter pins or similar to secure the bolts to prevent them

slipping out.

Summary of Contents for ELHY EB 630








































































Search results

Summary of Contents for ELHY EB 630

Reviews:

Related manuals for ELHY EB 630

Brands by name

Popular brands

EMG ELHY EB 630, Assembly Manual

Search results

Summary of Contents for ELHY EB 630

Reviews:

Related manuals for ELHY EB 630

Brands by name

Popular brands