EMG ELHY EB 630 Assembly Manual Download Page 58

Page: 58 / 71

Maintenance

9.1

Maintenance tasks

/ 71

ELHY-Montageanleitung_2021_EN.docx

WARNING

Pre-tensioned reset spring

Risk of injury when opening the ELHY

thruster due to the pre-

tensioned reset spring.

– Never attempt to open the ELHY

thruster in order to access

the reset spring.

– The ELHY

thruster may only be opened by instructed

specialists with corresponding training and special tools (e.g.
disassembly tools for thrusters with c-springs)

WARNING

Cylinder movements

Risk of crushing between surrounding hindrances and the cylinder
or connected components as a result of the cylinder retracting
automatically due to the reset spring with a hydraulic pressure
drop, or if the power supply is interrupted.

– Switching the motor off returns the cylinder to the limit

position.

– Before removing the ELHY

thruster, the connected unit such

as the brake must be secured to prevent movement.

Summary of Contents for ELHY EB 630








































































Search results

Summary of Contents for ELHY EB 630

Reviews:

Related manuals for ELHY EB 630

Brands by name

Popular brands

EMG ELHY EB 630, Assembly Manual

Search results

Summary of Contents for ELHY EB 630

Reviews:

Related manuals for ELHY EB 630

Brands by name

Popular brands