27
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF590
13. Light Kit LED Driver Replacement
(Continued)
13.13
Reconnect the motor AC power connector to the Light Kit
LED Driver connector (Figure 50).
Reconnect the motor DC power connector to the Light Kit
LED Driver connector (Figure 50).
LIGHT KIT
LED DRIVER
LIGHT KIT
LED DRIVER
CONNECTOR
LIGHT KIT
LED DRIVER
CONNECTOR
MOTOR DC POWER
CONNECTOR
MOTOR AC POWER
CONNECTOR
Figure 50
13.14
Replace the upper motor cover by reinstalling the
six upper motor cover screws, previously removed in Step
13.9 (Figure 51).
UPPER
MOTOR COVER
REINSTALL UPPER
MOTOR COVER
SCREWS (6)
Figure 51
13.15
Route the three motor leads through the 4.5” downrod
(Figure 52). Re-seat the downrod in the motor coupling.
Rotate and align the two downrod holes with the two holes
in the motor coupler as shown in Figure 52.
NOTE: It is important to keep the downrod holes
aligned with the motor coupler holes while reinstalling
the two setscrews.
Reinstall the two setscrews (previously removed) into the
motor coupler to capture the downrod in place (Figure 52).
MOTOR
COUPLING
REINSTALL
PHILLIPS HEAD
SETSCREWS (2)
DOWNROD
Figure 52
