Emerson Rosemount 848T, Quick Installation Manual

Page: 5 / 20

Quick Installation Guide
00825-0100-4848, Rev AA
May 2009
Rosemount 848T Wireless
5
S
TEP
1: P
HYSICAL
I
NSTALLATION
Initial Configuration
If the device was ordered with a factory configured Network ID and Join Key, it should join
the network with no user input. If unsure, the Network ID and the Join Key may be manually
entered to match the Gateway’s.
The Network ID and Join Key may be obtained from the Gateway on the
Setup>Network>Settings page on the web server (see Figure below).
The Network ID and Join Key may be changed in the wireless device by using the following
Fast Key sequence.
Sensor Configuration
Sensor inputs can be configured for different sensor types. To verify or change the sensor
configuration with a 375 handheld communicator, use the following Fast Key sequence.
Remote Mount
The Rosemount 848T Wireless can only be installed in the Remote Mount configuration
where the sensor is mounted separate from the 848T housing, then connected to the 848T
via conduit.
1. Install the sensor according to standard installation practices. Be sure to use thread
sealant on all connections.
Function Key Sequence Menu Items
Wireless 2,1,1
Join Device to Network
Function Key Sequence Menu Items
Sensor Configuration 2,1,3
Configure Sensors