Emerson Rosemount 848T, Quick Installation Manual

Page: 3 / 20

Quick Installation Guide
00825-0100-4848, Rev AA
May 2009
Rosemount 848T Wireless
3
W
IRELESS
C
ONSIDERATIONS
Power Up Sequence
The Power Module should not be installed on any wireless device until the Smart Wireless
Gateway (“Gateway”) is installed and functioning properly. Wireless devices should also be
powered up in order of proximity from the Gateway, beginning with the closest. This will
result in a simpler and faster network installation. Enable Active Advertising on the Gateway
to ensure that new devices join the network faster. For more information see the Smart
Wireless Gateway Manual (Doc. No. 00809-0200-4420).
Antenna Position
The antenna should be positioned vertically and it should be approximately 3 ft. (1 m) from
any large structure, building, or conductive surface to allow for clear communication to other
devices.
Figure 1.
Conduit Plug
The temporary orange plugs should be replaced with the included conduit plugs using
approved thread sealant.
Figure 2.