Emerson Rosemount 3308, Reference Manual

Page: 73 / 128

Reference Manual
00809-XXXX-4811, Rev AA
February 2012
6-3
Rosemount 3308
PRELIMINARY
DISPLAY OPERATION
During steady state operation, the LCD gives a periodic display of
user-chosen variables at the configured wireless update rate. These variables
can be chosen from a list of
XX: Level, …………………
The LCD Display will display the variables at the configured update rate, but
no faster than
XXX. Refer to page XX for instructions on configuring the
display.
Diagnostic Button
Screen Sequence
Detailed diagnostic information can be obtained by removing the display
cover of the Rosemount 3308 transmitter, and momentarily depressing the
"DIAG" button. The LCD will display the diagnostic screens as shown below.
Press the
Diagnostic button to display the TAG , Device ID , Network ID ,
Network Join Status , and Device Status screens.
The following five screens will display when the device is operating properly
and the Diagnostic Button has been pressed.
SV Screen - Measurement of mapped Second
Variable (default is XX)
Electronics Temperature
Supply Voltage
S N S R 2
True
D E V
2 5. 2 5
d e g c
S u p l y
7. 2 1
v o l t s