manualshive.com logo in svg

Emerson Rosemount 3051S Series, Reference Manual

The Emerson Rosemount 3051S Series, a cutting-edge industrial measurement solution, is now made even more user-friendly with the Quick Start Manual. This comprehensive manual provides step-by-step instructions, enabling effortless installation and configuration. Visit our website today to download this free manual and maximize the potential of your Emerson Rosemount 3051S Series.

Share
Download
background image

Reference Manual

00809-0100-4801, Rev FA

October 2010

Rosemount 3051S Series

A-28

Conduit Electrical Connector 
Standard

Standard

GE

(34)

M12, 4-pin, Male Connector (eurofast

®

) 

★

GM

(34)

A size Mini, 4-pin, Male Connector (minifast

®

)

★

Typical Model Number:

3051S1CD 2A 2 E12 A 1A DA2 B4 M5

(1) This option is only available with range codes 2A and 3A, 316L SST or Alloy C-276 isolating diaphragm and silicone fill fluid.
(2) Performance Class code 3 is available with Measurement Type code D only.
(3) 3051S_CD0 is only available with traditional flange, 316L SST diaphragm material, and Bolting option L4.
(4) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments. 

Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining 
environments.

(5) Tantalum diaphragm material is only available for ranges 2A - 5A, differential and gage. 
(6) “Assemble to” items are specified separately and require a completed model number. Process connection option codes B12, C11, D11, EA2, EA3, and 

EA5 are only available on differential Measurement Type, code D.

(7) Consult an Emerson Process Management representative for performance specifications.
(8) Not available with performance class code 3.
(9) Requires PlantWeb housing.
(10) Available approvals are FM Intrinsically Safe, Division 2 (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic Safety 

(option code I1), and IECEx Intrinsic Safety (option code I7).

(11) Available with output code A only. Available approvals are FM Intrinsically Safe, Division 2 (option code I5), ATEX Intrinsic Safety (option code I1), or IECEx 

Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information.

(12) Long-Life Power Module must be shipped separately, order Part #00753-9220-0001.
(13) Not available with output code X.
(14) Requires PlantWeb housing and output code A. Includes Hardware Adjustments as standard.
(15) Requires Rosemount Engineering Assistant to configure.
(16) Not available with process connection option code A11.
(17) Not available with output code F.
(18) Not available with housing style codes 00, 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(19) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson 

Process Management representative for additional information.

(20) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(21) Valid when SuperModule Platform and housing have equivalent approvals. 
(22) Only available with output code X.
(23) Not available with M20 or G ½ conduit entry size.
(24) Only available on differential and gage measurement types. Silicone fill fluid is standard.
(25) Not available with Housing code 7J.
(26) Not available with output code F, option code DA2, or option code QT.
(27) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management 

representative for additional information.

(28) P1 is not available with 3051S_CA0.
(29) Requires 316L SST, Alloy C-276, or Gold-plated 316L SST diaphragm material, assemble to Rosemount 305 integral manifold or DIN-compliant traditional 

flange process connection, and bolting option L8. Limited to Pressure Range (Differential), ranges 2A – 5A.

(30) Not available with output code F or X. Not available with housing code 7J. 
(31) Not available with Housing code 00, 5A, 5J, or 7J.
(32) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(33) Requires 316L SST diaphragm material, glass-filled PTFE O-ring (standard), and Process Connection code E12 or F12.
(34) Not available with Housing code 00, 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or 

FM FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009 to maintain outdoor rating (NEMA 4X and IP66).

Table A-1.  Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information

★ 

The Standard offering represents the most common options. The starred options (

★

) should be selected for best delivery.

__

The Expanded offering is subject to additional delivery lead time.

Summary of Contents for Rosemount 3051S Series

















































































































































































































































Reviews:

No comments

Related manuals for Rosemount 3051S Series

StoneAge AUTOSTROKE AST-200-V2 User Manual preview
AUTOSTROKE AST-200-V2
Brand: StoneAge Pages: 28
Gates AVCCAM AG-3DA1 Using preview
AVCCAM AG-3DA1
Brand: Gates Pages: 2
Panasonic AJHVF21G - HD EVF - MULTI-LANG Parts List preview
AJHVF21G - HD EVF - MULTI-LANG
Brand: Panasonic Pages: 4
Dakota Alert WTS-1000 Manual preview
WTS-1000
Brand: Dakota Alert Pages: 2
DAINCUBE DTP10-P Hardware User Manual preview
DTP10-P
Brand: DAINCUBE Pages: 38
Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
SimplyHome SH003B User Manual And Installation Instructions preview
SH003B
Brand: SimplyHome Pages: 2
Microlife IFR 100 Instructions Manual preview
IFR 100
Brand: Microlife Pages: 121
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Sage Sagewash Sanitizer Instructions preview
Sagewash Sanitizer
Brand: Sage Pages: 2
Recsea WHG-HERO3 Manual preview
WHG-HERO3
Brand: Recsea Pages: 9
BlueHive 035-6151-2 Manual preview
035-6151-2
Brand: BlueHive Pages: 7
Curt Manufacturing 31048 Installation Instructions Manual preview
31048
Brand: Curt Manufacturing Pages: 6
IMV VP-420 Specifications And Instruction Manuals preview
VP-420
Brand: IMV Pages: 8
ooma Telo Air 2 Quick Start Manual preview
Telo Air 2
Brand: ooma Pages: 27
Larson Electronics EXP-MS-N4X-AT-HV-V5 Instruction Manual preview
EXP-MS-N4X-AT-HV-V5
Brand: Larson Electronics Pages: 5
IFM PN72 Series Operating Instructions Manual preview
PN72 Series
Brand: IFM Pages: 33

Brands by name

Popular brands

Load more brands