Emerson Rosemount 1595, Reference Manual

Page: 15 / 32

Reference Manual
00809-0100-4828, Rev EA
November 2007
2-7
Rosemount 1595
For sizes > 24-in. (600 mm) and use with alignment tool.
1. When an alignment tool is provided, install the alignment tool on the
flange studs shown in Figure 2-7.
2. For Horizontal installation, use the horizontal lift hole (stamped HLH
on paddle) to lift the conditioning orifice plate from a horizontal
position and guide into location between the flanges.
3. For Vertical installation, first use the horizontal lift hole (HLH) to lift the
conditioning orifice plate from a horizontal position to vertical, then
use the vertical lift hole (stamped VLH on paddle) to lift the
conditioning orifice plate vertically and guide into location between
the flanges.
Figure 2-7. Rosemount 1595P
(sizes > 24-in (600 mm))
installation
(1) The installation drawings applies when using the Rosemount 3051S, Rosemount 3051C,
and Rosemount 3095MV transmitter. See the following documents for quick installation instruction of
the transmitters.
Rosemount 3051S: document number 00825-0100-4801
Rosemount 3051C: document number 00825-0100-4001
Rosemount 3095MV: document number 00825-0100-4716
Nuts
Jackscrew
Nut
Jackscrew
Nuts
Pipe
Section
Jackscrew
Jackscrew
Nut
Gasket (2)
1595
(1)
Stud
Transmitter
Alignment Tools
“A”
DETAIL “A”
1595
(1)
Alignment Tools
Gasket (2)