6.4.5
Cell Constant
The display screen for entering a cell
Constant
for the sensor is shown.
The default value is displayed in bold type. Refer to configuring contacting
measurements flow diagram (
Figure 6-2
) to complete this function.
6.4.6
RDT Offset
The display screen for entering the
RTD Offset
for the sensor is shown.
The default value is displayed in bold type. Refer to configuring contacting
measurements flow diagram (
Figure 6-2
) to complete this function.
6.4.7
RDT Slope
The display screen for entering the
RTD Slope
for the sensor is shown.
The default value is displayed in bold type. Refer to configuring contacting
measurements flow diagram (
Figure 6-2
) to complete this function.
6.4.8
Temp Comp
The display screen for selecting
Temperature Compensation
as Slope, Neutral
Salt, Cation or Raw is shown. The default value is displayed in bold type.
Refer to configuring contacting measurements flow diagram (
Figure 6-2
) to
complete this function.
6.4.9
Slope
The display screen for entering the conductivity/temp
Slope
is shown. The
default value is displayed in bold type. Refer to configuring contacting
measurements flow diagram (
Figure 6-2
) to complete this function.
6.4.10
Reference Temp
The display screen for entering the
Reference Temperature
is shown.
The default value is displayed in bold type. Refer to configuring contacting
measurements flow diagram (
Figure 6-2
) to complete this function.
6.4.11
Filter
The display screen for entering
Input filter
value is shown in seconds.
The default value is displayed in bold type. Refer to configuring contacting
measurements flow diagram (
Figure 6-2
) to complete this function.
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
Cell Constant
1
.00000 /cm
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
RTD Offset
0
.00°C
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
RTD Slope
2.00%/°C
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
Temp Comp
Slope
Neutral Salt
Cation
Raw
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
Slope
2.00 %/°C
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
Ref Temp
(25.0°C normal)
+25.0
°
C
S1: 1.234µS/cm 1.234°C
S2: 12.34pH 1.234°C
S3: 12.34µS/cm 1.234°C
S
N
Input filter
02 sec
Section 6: Programming Measurements
36
Instruction Manual
LIQ-MAN-1057
Section 6: Programming Measurements
April 2017
