PACSystems Ethernet Switch SLM080 User Manual
Section 6
GFK-3125A
Jan 2020
Command Line Interface Management
83
stp-path-cost
[1to200000000]
I
Use the spanning-tree cost
interface configuration command
to set the path cost for Spanning
Tree
Protocol (STP) calculations. In
the event of a loop, spanning
tree considers the path cost
when selecting
an interface to place into
the forwarding state.
switch(config)#interface
fastEthernet 2
switch(config-if)#stp-path-
cost 20
stp-path-priority
[Port Priority]
I
Use the spanning-tree port-
priority interface configuration
command to configure a port
priority that
is used when two switches tie for
position as the root switch.
switch(config)#interface
fastEthernet 2
switch(config-if)# stp-path-
priority 127
stp-admin-p2p
[Auto|True|False]
I
Admin P2P of STP priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)# stp-
admin-p2p Auto
stp-admin-edge
[True|False]
I
Admin Edge of STP priority on this
interface.
switch(config)#interface
fastEthernet 2
switch(config-if)# stp-
admin-edge True
stp-admin-non-stp
[True|False]
I
Admin NonSTP of STP priority on
this interface.
switch(config)#interface
fastEthernet 2
switch(config-if)# stp-
admin-non-stp False
Show spanning-tree
E
Display a summary of the
spanning-tree states.
switch>show spanning-tree
no spanning-tree
G
Disable spanning-tree.
switch(config)#no
spanning-tree