PACSystems Ethernet Switch SLM042 User Manual
Section 5
GFK-3125A
Jan 2020
Web Management
66
5.2.9.4
Port Monitoring
Port monitoring function supports TX (egress) only, RX (ingress) only, and both TX/RX monitoring. TX
monitoring sends any data that egress out checked TX source ports to a selected TX destination port as
well. RX monitoring sends any data that ingress in checked RX source ports out to a selected RX
destination port as well as sending the frame where it normally would have gone. Note that keep all
source ports unchecked in order to disable port monitoring.
Figure 53: Port Monitoring
The following table describes the labels in this screen.
Label
Description
Destination Port
The port will receive a copied frame from source port for monitoring
purpose.
Source Port
The port will be monitored. Mark the blank of TX or RX to be monitored.
TX
The frames come into switch port .
RX
The frames receive by switch port .
Apply
Click
“
Apply
”
to activate the configurations.
Clear
Clear all marked blank.(disable the function)
Help
Show help file.