5
ASSEMBLY AND DISASSEMBLY PROCEDURE FOR T-SLOT DETECTORS
DETECTOR ASSEMBLY
DETECTOR DISASSEMBLY/REASSEMBLY
A -
Turn the detector's knurled nut by 90° so that it is retracted inside.
B -
Press the detector down into the groove.
C -
Position the detector at the desired sensing point.
D -
Hold the detector in place as you tighten the screw (½ turn).
Max. screw tightening torque:
0,5
N.m
E -
Fix the adjustment position with the memory unit and secure the cable into the groove with the clip.
1 - Loosen the knurled nut by 90° and remove the cable from the clip.
2 - The following installation, adjustment and tightening steps are identical to steps B, C and D described above.
90°
A
B
C
0,5 Nm
0,6 x 3,5 mm
sw 1,5 mm
D
E
Clip