Reference Manual
Programming
MAN-0076, Revision 09
June 2016
Programming
21
9.
Activate the enter key (switch 3) when the desired value is displayed.
10.
After setting the baud rate, exit this sub menu option using switch 3, and then activate the down
arrow key (switch 2) to highlight ‘Parity Bit’.
11.
Activate switch 3, then activate the up key (switch 2), or the down key (switch 1) to choose a
value.
12.
Activate the exit key (switch 3) when the desired value is displayed, then select “Exit” at each
menu stage (sub menu and main menu).
4.11
Setup current date
This option allows you to set the current date for event logging. The default date is set at the factory in
Mountain Time.
1.
Enter the main menu by selecting/activating any key to get the “enter main menu” prompt, then
activate switch 1 to select “yes”.
2.
Activate the up key (switch 1) or down key (switch 2) until “Setup Current Date?” option is
displayed.
3.
Activate the enter key (switch 3) to display the sub menu option ‘year’, ‘month’, ‘day’.
4.
Activate the up key (switch 1) to change the current year/month/day settings and switch 2 to
cycle across ‘year’, ‘month’, ‘day’ values and ‘OK’.
5.
After desired setting are made, navigate to “OK?” and activate the enter key (switch 3) to
confirm. To exit main menu, select “Exit” at each menu stage (sub menu and main menu).
4.12
Setup current time
This option allows you to set the current time for event logging. The default time is in Mountain Time.
1.
Enter the main menu by activating any key to get the “enter main menu” prompt, then activate
switch 1 to select “yes”.
2.
Activate the up key (switch 1) or down (switch 2) until “Setup Current Time?” option is displayed.
3.
Activate the enter key (switch 3) to display the sub menu: hour’, ‘minute’, ‘seconds’.
4.
Activate the up arrow key (switch 1) to change the current hour/minute/second settings, then
use switch 2 to cycle across ‘hour’, ‘minute’, ‘seconds’ values and ‘OK’.
5.
After desired settings are made, navigate to ‘OK’ and activate the enter key (switch 3) to confirm.
To exit main menu, select “Exit” at each menu stage (sub menu and main menu).
4.13
View events log
The Millennium II Transmitter has the ability to store up to 980 events. Events can be viewed by
navigating through this menu option. The most recent events are shown first.
1.
Enter the main menu by activating any key to get the “enter main menu” prompt, then activate
switch 1 to select “yes”.
2.
Navigate through the main menu using switch1 or switch 2 until “View Event Log?” is displayed.