Reference Manual
Introduction
MAN-0076, Revision 09
June 2016
Introduction
1
Section 1:
Introduction
1.1
Models covered
A Millennium II gas detection system is composed of a field mounted transmitter and Millennium II
series sensors which may be integrally mounted to the transmitter or remotely mounted.
The transmitter is certified for use in hazardous locations and is available as a single or dual sensor
system. All operator controls including configuration and calibration can be accessed without opening
the enclosure by using other communication devices and the attached magnet to actuate magnetic
Reed switches. Available outputs are: conventional 4 to 20 mA analog, Analog/HART,
electromechanical relays, or Modbus RTU digital.
1.2
Service support
Technical support for this product can be provided by contacting your local Emerson Process
Management representative or by contacting the Technical Support department at +1 866 347 3427
(toll free) or
.
1.3
Return of material
To expedite the return of this product, proper communication between the customer and the factory is
important. Before returning a product, call +1 866 347 3427 (toll free) or e-mail
for a Return Material Authorization (RMA) number.
On the return of the equipment, include the following information:
1.
RMA number provided to you by Rosemount
2.
Company name and contact information
3.
Ship all equipment, prepaid to:
Rosemount
6021 Innovation Boulevard
Shakopee, MN 55379
4.
Mark all packages with the RMA number and type of return (e.g. return for evaluation)
Pack items to protect them from damage and use anti-static bags or aluminum-backed cardboard as
protection from electrostatic damage.
All equipment must be shipped prepaid. Collect shipments will not be accepted.
1.4
Product recycling/disposal
Recycling of equipment and packaging should be taken into consideration and disposed of in
accordance with local and national legislations/regulations.