Flow
•
5–40 l/min for 2-inch Schedule 40 calibration bore section (1.5 - 10.5
gal/min)
•
5–300 l/min for 3-inch Schedule 80 calibration bore section (1.5 - 80
gal/min)
Viscosity
0.5 to 100 cSt
Temperature
–50 °C to 200 °C (–58 °F to 392 °F)
–40 °C to 200 °C (–40 °F to 392 °F) in hazardous areas
Pressure
70 bar @ 204 °C, subject to process connections
Important
•
To ensure that the fluid within the pocket is refreshed in a timely manner, verify that flow
velocity at the pipe wall and fluid viscosity are within the limits described in this table.
•
The thermal mass of the flanges may affect the response time of the meter to temperature
changes.
Procedure
See
for an example installation of a meter in a flow-through chamber.
Mounting
12
Micro Motion Heavy Fuel Viscosity Meter
