Emerson Laclede Eco LED CF995BS01 Owner'S Manual Download Page 25

Page: 25 / 28

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: CF995-1

13. Repair Parts Listing

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
• PART NUMBER • NAME OF ITEM

• PART DESCRIPTION • MODEL NUMBER
The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.

Part Numbers

Key Model Number Model Number

No. Description CF995BS01 CF995VNB01

* Hanger Ball Assembly, 761655-97 761655-96

Consisting of:

1 Hanger Bracket — —

2 Hanger Ball — —

3 Downrod (10”) — —

* Parts Bag Containing: 764458-CHRM 764458-BLOX

4 Pin, Clevis (1) — —

5 Clip, Hairpin (1) — —

6 Threaded Stud, #8 - 32 x 1-1/4” (2) — —

7 Lockwasher, External Tooth #8 (2) — —

8 Knurled Knob, #8 - 32 (2) — —

9 Screw, Washer Head, #10 - 32 x 1/4” (21) — —

10 Screw, Pan Head, 1/4 - 20 x 3/8” with Captive Lockwasher (11) — —

11 Screw, Pan Head, #8 - 32 x 5/16” (1) — —

12 Wire Connector (3) — —

13 Balancing Kit (1) — —

14 Ceiling Cover (1) 764435-BS 764435-VNB

15 Motor Coupler Cover (1) 764436-BS 764436-VNB

16 Upper Glass Shade (1) 764446-OM 764446-OM

17 Lower Light Fixture (1) 764453-WW 764453-WW

18 Lower Light Cover (1) 764442-BS 764442-VNB

19 Lower Glass Shade (1) 764457-OM 764457-OM

20 Finial Nut(1) 764581-BS 764581-VNB

21 Fan Blades (set of 5) 764449-CHG/DM 764449-DM/WA

22 Blade Flanges (set of 5) 764447-BS 764447-VNB

23 Control Receiver DC Motor (1) 765097 765097

24 Remote Transmitter (1) SR600 SR600

— Owner's Manual BP7479-1 BP7479-1

Summary of Contents for Laclede Eco LED CF995BS01





























Search results

Summary of Contents for Laclede Eco LED CF995BS01

Reviews:

Related manuals for Laclede Eco LED CF995BS01

Brands by name

Popular brands

Emerson Laclede Eco LED CF995BS01, Owner'S Manual

Search results

Summary of Contents for Laclede Eco LED CF995BS01

Reviews:

Related manuals for Laclede Eco LED CF995BS01

Brands by name

Popular brands