Before installation these instructions must be read fully and understood
1 SAFETY PRECAUTIONS
Precautions for using KTM valves safely are
highlighted with the following two warning
signs to indicate the level of danger posed.
Please read the postscript carefully to ensure
safety and prevent any damage before starting
to use the product.
WARNING
A potentially hazardous situation which, if not
avoided, could result in death or serious injury.
WARNING
A potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
KTM
POWDER DISCHARGE SYSTEM (PDS) METALTITE
®
BALL VALVES
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Emerson.com/FinalControl
© 2020 Emerson. All rights reserved.
VCIOM-14921-EN 20/01
TABLE OF CONTENTS
1. Safety precautions ......................................... 1
2. Specifications ................................................ 2
3. Range of application...................................... 3
4. Storage and preservation before
installation ..................................................... 4
5. Transportation ............................................... 4
6. Installation ..................................................... 4
7. Operation ....................................................... 5
8. Maintenance .................................................. 6
9. Troubleshooting ............................................ 7
10. Valve disassembly ......................................... 7
11. Warranty ....................................................... 9
Please read through this manual completely
before operating the valves.
Powder Discharge System (PDS) Metaltite
®
Ball
Valves are usable for ON-OFF powder service
such as polyethylene, polypropylene and
hydrocarbon vapor etc.
Please use the valves according to warnings
and cautions described in this document.
Failure to do so could result in an accident
due to wrong storage, installation, operation,
maintenance and disassembling and/or serious
damage.
Please keep this manual in a handy place for
immediate reference; be sure to provide it to
purchaser, contractor, piping designer, user,
operator or maintenance technician.
KTM reserves the right to discontinue the
manufacture of, change or modify design and/
or construction of any KTM product during the
manufacturing procedure, without incurring
any obligation to accept for credit, to replace or
furnish or install such changes or modifications
on products previously or subsequently sold.
This document is subject to changes without
notice.
