7
Property D
a
m
a
ge:
Join remaining tube
to cold water supply only.
A
5
It
is recommended that the water
connection be made using a shutoff
valve
(not supplied).
Where plumbing codes permit, a
saddle valve
(not supplied)
can be
used to supply water to the faucet.
Follow the directions for “self-
piercing attachments” included with
the valve.
FINAL WATER CONNECTION
Sc
a
lding H
a
z
a
rd:
Steam and hot water can spit
forcefully from the spout if the temperature is set
too high at startup.
B
A
Check all connections to ensure they
are tight and that there are no leaks.
Plug in hot water tank.
W
a
ter will be cold
a
t first.
Allow 12-15 minutes for w
a
ter to re
a
ch
t
a
rget temper
a
ture.
Gurgling or hissing is norm
a
l during the
initi
a
l he
a
ting cycle.
Property D
a
m
a
ge:
A standard grounded outlet within
30" of the faucet is required under the sink. Do not
use an extension cord set with the dispenser.
FILL TANK & THEN CONNECT POWER
Turn on the cold water supply.
Lift handle to
WARM
position.
Leave faucet open for at least
1 min. to fill the tank. Do not close
faucet until water is flowing freely
from the spout.
6
Nothing will h
a
ppen until t
a
nk fills
a
nd
w
a
ter begins running out of f
a
ucet.
