The w
a
ll outlet for your f
a
ucet must h
a
ve power supplied to it continuously
a
nd must be fused. It should not be controlled by the s
a
me w
a
ll switch
th
a
t oper
a
tes
a
food w
a
ste disposer.
PREPARATION
START HERE
PROPER INSTALLATION SHOULD TAKE ABOUT 2-4 HOURS
Identify locations for the faucet and
tank.
Check to make sure there is proper
clearance for faucet handle to be fully
opened.
Check to make sure counter is not
too thick.
Make sure there is a grounded
electrical outlet under the sink.
Turn off water supply.
If using the sink sprayer hose hole,
remove nut that connects sprayer
hose at bottom of faucet.
Using adjustable wrench, remove nut
connecting sprayer washer flange in
sprayer hole.
Plug hose opening with either a 1/8"
plug or a 1/4" cap
(not supplied).
1
A
B
4
Consult
a
profession
a
l before drilling into
a
surf
a
ce other th
a
n st
a
inless steel.
C
Wh
a
t if you don’t h
a
ve
a
spr
a
yer hole or
don’t w
a
nt to use it?
Many homeowners replace the soap
dispenser in their sink with an instant
hot water dispenser.
If drilling a hole into a stainless steel
sink or counter top, you can cut a
mounting hole for the faucet with a
hole saw for stainless steel, or you can
use a hole punch.
Required Hole Diameter
1
1
⁄
4
" - 1
1
⁄
2
"
Required minimum from
center of hole to wall
Maximum counter
thickness (depth)
2
"
1
1
⁄
2
"
If you h
a
ve to drill through sink or
countertop, you m
a
y need to rent or purch
a
se
the
a
ppropri
a
te tools.
