manualshive.com logo in svg

Emerson FloBoss S600, Instruction Manual

Share
Download
Emerson FloBoss S600 Instruction Manual Download Page 72

S600 Instruction Manual 

5.7.7  Using the Print Key  

By default, the S600 is configured to output reports to a serial printer 
or a terminal. The S600 also outputs reports to its internal webserver.  
You use the PRINT key to generate either a constant log or one of 
several pre-configured reports. These pre-configured reports include:  

Report  

Description 

Constants Log

 

Lists all the constant parameters and values that 

are available for change from the display 

(excluding those on menu 8).

  

Note: 

You can print the Constants Log as either a 

text (.TXT) file or with commas separating the 

items (CSV).   

Display Dump

 

Lists the whole display matrix.

 

 

Security Dump

 

Lists the whole display matrix, along with the 

current security levels assigned to data items.

 

 

All Alarms

 

Lists all possible alarms that can be generated by 

the alarm system on this configuration.

 

 

Current Report

 

Lists the current report as configured, normally this 

would consist of the meter run totals.

 

 

Config Report

 

Lists the configuration-specific parameters, 

including any configured installed calculation sets.

 

 

Archived Reports

 

Lists all archived reports, sorted by time and date.

 

 

Current Alarms

 

Lists all the acknowledged and un-acknowledged 

alarms currently set in the flow computer in 

separate chronological lists.

 

 

Modbus Maps

 

Lists the Modbus maps stored in the FloBoss S600 

that are assigned to a telemetry link.

 

 

Alarm and Event 
Log 

Lists history of all alarms and events.  

 
When you press 

PRINT

, the S600 displays the Print Options menu:  

 

 

PRINT OPTIONS 

1. HELP 

2* CONFIGURATION 

3* REPORTS 

4* COMMUNICATIONS 

5. CURRENT ALARMS 

6* LOGS 

7. ABORT PRINTING 

 

Figure 5-6. S600 Print Options  

Select a report based on the following options:  

Option  

Sub Reports 

Configuration

 

1  Constant Log TXT  

2  Constant Log CSV  

3  Display Dump  

4  Security Dump  

5  All Alarms 

5-12 

Front Panel 

Revised Jan-07 

Summary of Contents for FloBoss S600













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands